Motorola RFS7000 Series System Reference Manual page 460

B - 16 RFS7000 Series Switch System Reference Guide
Once an AAP is adopted by the switch, it displays within the switch
screen (under the Network parent menu item) as an AP-5131 or AP-5181 within the
column.
B.4.3 Adaptive AP Deployment Considerations
Before deploying your switch/AAP configuration, refer to the following usage caveats to optimize its
effectiveness:
• Extended WLANs are mapped to the AP's LAN2 interface and all independent WLANs are
mapped to the AP's LAN1 Interface.
• If deploying multiple independent WLANs mapped to different VLANs, ensure the AP's LAN1
interface is connected to a trunk port on the L2/L3 switch and appropriate management and
native VLANs are configured.
• The WLAN used for mesh backhaul must always be an independent WLAN.
• The switch configures an AAP. If manually changing wireless settings on the AP, they are not
updated on the switch. It's a one way configuration, from the switch to the AP.
• An AAP always requires a router between the AP and the switch.
• An AAP can be used behind a NAT.
• An AAP uses UDP port 24576 for control frames and UDP port 24577 for data frames.
• Multiple VLANs per WLAN, L3 mobility, dynamic VLAN assignment, NAC, self healing,
rogue AP, MU locationing, hotspot on extended WLAN are some of the important wireless
features not supported in an AAP supported deployment.
Access Port Radios
AP Type