Viewing Filtered Mus - Motorola RFS7000 Series System Reference Manual

6-12 Switch Security
5. When using the Frames with known bad ESSIDs
of known bad ESSIDs for the violation parameter. To enter this information, select
known bad ESSIDs
bad ESSIDs can be added and removed.
NOTE If using the
are entered in the
6. Click on Apply button to save the configuration.
7. Click on Revert to rollback to the previous configuration.

6.3.2 Viewing Filtered MUs

Periodically check the Filtered MUs
based on the settings defined within the
attributes exported to a user defined location.
To view status of those MUs filtered using the settings defined within the
1. Select Security >
2. Select the Filtered MUs
The Filtered MUs tab displays the following read-only information for detected MUs:
MAC Address
Radio Index
and then click the Bad Essid Config
Frames with known bad ESSIDs
Bad Essid Config
tab to review those MUs filtered by the switch for incurring a violation
Configuration
Mobile Unit Intrusion Detection
tab.
Displays the MU's MAC address. Refer to this address as the
potentially hostile MU's identifier.
The Radio Index displays the index of the radio detecting the MU
violation. Use this information to discern whether the detected MU
is known and whether it truly constitutes a threat.
violation parameter it is necessary to enter a list
button to launch a dialogue box where
violation parameter if no ESSIDs
dialogue, this parameter will not function.
tab. Each MU listed can be deleted from the list or its
Configuration
from the main tree menu.
Frames with
tab: