Motorola RFS7000 Series System Reference Manual page 400

7-14 Switch Management
2. Click the Wireless Statistics Thresholds
3. Refer to the following information for thresholds descriptions, conditions, editable threshold values
and units of measurement.
Threshold Name
(Description)
Threshold Conditions Displays the criteria used for generating a trap for the specific
Threshold values for:
MU
Threshold values for:
AP
Threshold values for:
WLAN
Threshold values for:
Switch
tab.
Displays the target metric for the data displayed to the right of the
item. It defines a performance criteria used as a target for trap
configuration.
event. The Threshold conditions appear as greater than, less then
or worse then and define a baseline for trap generation.
Displays a threshold value for associated MUs. Use the
Name and Threshold Conditions
appropriate Threshold Value unique to the MUs within the
network. For information on specific values, see
Threshold Values on page 7-15.
Set a threshold value for adopted APs. Use the
and Threshold Conditions as input criteria to define an
appropriate Threshold Value unique to the APs within the network.
For information on specific values, see
Values on page 7-15.
Define a threshold value for associated WLANs. Use the
Threshold Name and Threshold Conditions
define an appropriate Threshold Value unique to the WLANs within
the network. For information on specific values, see
Threshold Values on page 7-15.
Use the Threshold Name and
criteria to define an appropriate Threshold Value unique to the
switch. For information on specific values, see
Threshold Values on page 7-15.
Threshold
as input criteria to define an
Wireless Trap
Threshold Name
Wireless Trap Threshold
as input criteria to
Wireless Trap
Threshold Conditions as input
Wireless Trap