Motorola RFS7000 Series System Reference Manual page 309

3. Click the Add button within the Associated Rules field.
4. Use the Precedence
The rules within an ACL will be applied to packets based on their precedence value. Rules with lower
precedence are always applied first.
NOTE If adding an access control entry to an ACL using the switch SNMP interface,
Precedence
5. Use the Operation drop-down menu to define a permit, deny or mark designation for the ACL. If the
action is to mark, the packet is tagged for priority.
6. Select the Logging checkbox to generate log messages when a packet has been forwarded, denied
or marked based on the criteria specified in the access lists.
7. If mark is selected from within the
enabled. Select the 802.1p (0 - 7)
with this ACL mark designation.
8. If the selected Protocol
and ICMP Code.
NOTE If wanting to block ICMP requests from an MU to the switch, set the ICMP type to
8 and the code to 0.
field to enter a precedence (priority) value between 1 and 5000.
is a required parameter.
Operations drop-down menu, the
or TOS(0 - 255)
is icmp, click the Protocol Options
Attribute to mark
checkbox and define the attribute receiving priority
button to configure the
6-25
Switch Security
field is
ICMP Type