6.5.4.1 Adding or Editing a New ACL WLAN Configuration
After creating an ACL, it can be applied to one or more WLANs on the switch. To attach an ACL to a WLAN:
1. Select
Security
>
2. Click on the
Attach-WLAN
3. Click the
Add
button.
4. Define a
WLAN Index
and cannot be modified.
5. Use the
IP ACL
drop-down menu to select an IP ACL to configure for the WLAN interface.
6. Use the
MAC ACL
7. Select either the
8. Refer to the
Status
error messages if something goes wrong in the transaction between the applet and the switch.
9. Click
OK
to use the changes to the running configuration and close the dialog.
10. Click
Cancel
to close the dialog without committing updates to the running configuration.
6.5.5 Reviewing ACL Statistics
Use the
Statistics
tab to view set of statistics for those ACLs defined for use with the switch. The Statistics
tab only displays data for router ACLs.
NOTE ACL statistics are only displayed for router ACLs.
To review ACL statistics:
1. Select
Security
>
ACLs
from the main menu tree.
tab.
between 1 and 256. If editing the ACL configuration, the index is read only
drop-down menu to select the MAC ACL to configure for the WLAN interface.
Inbound
or
Outbound
radio button to define which direction the ACL applies.
field for the current state of the requests made from applet. This field displays
ACLs
from the main menu tree.
6-31
Switch Security