Motorola RFS7000 Series System Reference Manual page 204

4-118 Network Setup
2. Click the Adopted AP
3. Refer to the Adopted AP
MAC Address
Model
Serial
HW Version
IP Address
Bootloader
Protocol Version
Fw Version
Radio Indices
4. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
tab.
screen for the following information:
Displays the radio's first MAC address when it is adopted by the
switch.
Displays the model number of the access port.
Displays the serial number of the access port, and is used for
switch management purposes. It is read-only and cannot be
modified.
Displays the hardware version of the access port. This information
can be helpful when troubleshooting problems with the access
port.
Displays the IP address of the adopted access port.
Displays the software version the access port boots from. This
information can be helpful when troubleshooting problems.
Displays the version of the interface protocol between the access
port and the switch. This information can be helpful when
troubleshooting problems with the access port.
Displays the access port firmware version at run time. Use this
information to assess whether the software requires an upgrade
for better compatibility with the switch.
Displays the indices of the radios belonging to the selected access
port. These indices are equivalent to a numerical device
recognition identifier (index) for the radio.