Adding A New Discovery Profile - Motorola RFS7000 Series System Reference Manual

If SNMP v3 is used with a discovering profile, a
and Password are required to match the name used by the remote network management software of
the discovered switch
When the credentials of the V2 Read Community or V3 Authentication screens are satisfied, the
switch discovery process begins.
7. If necessary, click the
the discovery operation.

5.7.1.1 Adding a New Discovery Profile

If the contents of an existing profile are no longer relevant to warrant modification using the Edit function, then
a new switch discovery profile should be created.
To create a new switch discovery profile:
1. Select Services
2. Click the Add button at the bottom of the screen.
3. Define the following parameters for the new switch discovery profile:
Profile Name
Start IP Address
End IP Address
Stop Discovery button (enabled only during the discovery operation) to stop
> Discovery from the main menu tree.
Define a user-assigned name used to title the profile. The profile
name should associate the profile with the group of devices or area
where the discovered devices should be located.
Enter the starting numeric (non DNS) IP address from where the
search for available network devices is conducted.
Enter the ending numeric (non DNS) IP address from where the
search for available network devices is conducted
V3 Authentication screen displays. The User Name
5-59
Switch Services