Adding A New Acl L2/L3 Configuration - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
6-28
Switch Security
2. Click the
Attach-L2/L3
3. Refer to the following information as displayed within the Attach - L2/L3 tab:
Interface
IP ACL
MAC ACL
4. Select an interface and click on
5. Select an interface and click the
the switch).
6. Click on
Add
button to add an physical or VLAN interface to the switch. For more information, see
Adding a New ACL L2/L3 Configuration on page
6.5.3.1 Adding a New ACL L2/L3 Configuration
After creating an ACL, it can be applied to one or more interfaces. ACLs are applied on layer 2 and layer 3
interfaces in the inbound direction only. To add an ACL interface to the switch:
1. Select
Security
>
2. Click on the
Attach-L2/L3
tab.
Displays the interface on which the ACL is applied. Available
interfaces include ge1, ge2, ge3, ge4 and VLAN1.
Displays an IP ACL attached to the L2 or L3 interface in the inbound
direction.
Displays the MAC ACL attached to the L2 interface in the inbound
direction.
Edit
to modify the ACL interface, IP ACL and MAC ACL values.
Delete
button to delete the ACL from the list available (but not from
ACLs
from the main menu tree.
tab.
6-28.
Advertisement
Table of Contents
