Configuring Excluded Ip Address Information - Motorola RFS7000 Series System Reference Manual

5-12 Switch Services
IP Address
Hardware Address
Client Name
Client ID
4. Click the Edit button to modify the properties displayed on an existing DHCP pool. For more
information, see Editing the Properties of an Existing DHCP Pool on page
5. To delete an existing DHCP pool from the list of those available, highlight the pool from within the
Pool Name field and click the
6. Click the Add button to create a new DHCP pool. For more information, see
Adding a New DHCP Pool on page
7. Click the Options
information, see Configuring DHCP Global Options on page

5.2.3 Configuring Excluded IP Address Information

The DHCP Server may have some IP addresses unavailable when assigning IP address ranges for a pool. If IP
addresses have been manually assigned and fixed, they need to be made available for the administrator to
exclude from possible selection.
To view excluded IP address ranges:
1. Select Services
Displays the IP address for the client using the pool name listed.
Displays the type of interface used to pass DHCP discover and
request exchanges between the switch DHCP server and DHCP
clients. The Hardware Address field also displays the address of
the DHCP client for whom the static IP is reserved.
Displays the name of the client requesting DHCP Server support
over this interface.
Displays the client identifier based on the identifier static IP
assigned. The hardware address and the client identifier should not
be configured on the same host pool.
Delete button.
5-7.
button to insert a global pool name into the list of available pools. For more
> DHCP Server from the main menu tree.
5-6.
5-9.