Adding An Ip Address For A Dns Server; Configuring Global Settings - Motorola RFS7000 Series System Reference Manual

4. Select an IP Address from the table and click the
the list.
5. Click the Add button to display a screen used to add another domain name server. For more
information, see Adding an IP Address for a DNS Server on page
6. Click the Global Settings
and the domain name specified. For more information, see

4.2.1.1 Adding an IP Address for a DNS Server

Add an IP address for a new domain server using the
1. Click the Add button within the Domain Network System screen.
The new Configuration
2. Enter the Server IP Address
3. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
4. Click OK to use the changes to the running configuration and close the dialog.
5. Click Cancel to close the dialog without committing updates to the running configuration.

4.2.1.2 Configuring Global Settings

Use the Global Settings screen to query domain name servers to resolve domain names to IP addresses. Use
this screen to enable/disable
using hostnames rather than IP addresses.
1. Click the Global Settings
A Configuration
button to open a screen that allows domain lookup to be enabled/disabled
screen displays enabling you to add IP address for the DNS Server.
to define the IP address of the new static domain name server.
field for the current state of the requests made from applet. This field displays
Domain look up, which allows you to use commands like ping, traceroute etc.
button in the main Domain Network System screen.
screen displays for editing the DNS settings of the server.
Delete button to remove the selected entry from
4-5.
Configuring Global Settings on page
Add screen.
4-5
Network Setup
4-5.