Motorola RFS7000 Series System Reference Manual page 118

4-32 Network Setup
pool representative of the WLAN. The switch tracks the number of MUs per VLAN, and assigns the least used/
loaded VLAN to the MU. This number is tracked on a per-WLAN basis.
To assign multiple VLANs to a WLAN:
1. Select Network
2. Select an existing WLAN from those displayed within the
button.
A WLAN screen displays with the WLAN's existing configuration.
3. Revise the VLAN ID
By default, all WLANs are initially assigned to VLAN 1.
4. Select the Dynamic Assignment
WLAN.
5. Select the Assign Multiple VLAN(s)
the Multiple VLAN Mapping screen.
6. Configure the Multiple VLAN Mapping for WLAN
VLANS for the selected WLAN.
Multiple VLAN's per WLAN are mapped (by default) to a regular VLAN and are not supported on an
adaptive AP. Refer to
independent VLAN for adaptive AP support.
VLAN
User Limit
NOTE The maximum number of secondary IPs that can be assigned to a VLAN is 32.
7. Select the Insert
8. Select a row from the Multiple VLAN Mapping table and click the
mapping of a VLAN to a WLAN.
9. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
> Wireless LANs from the main menu tree.
(if necessary).
checkbox for an user based VLAN assignment with Radius for this
button to map a WLAN to more than one VLAN. This displays
Editing the WLAN Configuration on page 4-27
Displays the VLANs currently mapped to the WLAN. By default, VLAN 1 is
configured for any selected WLAN.
Displays the user limit configured for the mapped VLAN. The maximum allowed
user limit is 8192 per VLAN.
button to add the VLAN using the criteria described above.
field for the current state of the requests made from applet. This field displays
Configuration tab and click the
table as required to add or remove multiple
to select and define an
Remove button to delete the
Edit