Motorola RFS7000 Series System Reference Manual page 218

4-132 Network Setup
2. Select the PortInstance
The Port Instance table displays the following:
ID
Index
State
Role
Internal Root Cost
Designated Bridge
Designated Port
Priority
AdminInternal Path
Cost
OperInternal Path
Cost
3. If necessary, select a CIST Index from the table and click on
and internal path cost value. For additional information, see
Editing a Port Instance Configuration on page
tab.
Displays the port instance ID.
Displays the port index.
Displays the availability status of the port.
Displays the state of the port. It can be either
Disabled.
Displays the Internal Root Cost of a path associated with an
interface. The lower the path cost, the greater likelihood of the
interface becoming the root.
Displays the ID of the bridge that sent the best BPDU.
Displays the ID of the port that sent the best BPDU received on this
port.
Displays the port priority set for the bridge. The lower the path cost,
the greater likelihood of the bridge becoming the root.
Displays the Admin Internal Root Cost of an associated path. The
lower the path cost, the greater likelihood of the interface
becoming the root.
Displays the Operational Internal Root Cost of a path associated
with an interface. The lower the path cost, the greater likelihood of
the interface becoming the root.
4-133.
Enabled or
Edit button to change the port priority