Configuring Radius User Groups - Motorola RFS7000 Series System Reference Manual

6-82 Switch Security

6.9.6 Configuring Radius User Groups

The Groups tab displays a list of all groups in the local Radius server's database. The groups are listed in the
order added. The existing configuration for each group is displayed to provide the administrator the option of
using a group as is, modifying an existing group's properties or creating a new group.
To access the configuration of existing user groups:
1. Select Security >
2. Select the Groups
3. Refer to the user groups listed to review the following read-only attributes for each group:
Name
Guest Group
VLAN ID
Time of Access Start
Radius Server from the main menu.
tab.
Displays the unique name assigned to each group. The group
name should be indicative of the user population within and their
shared activity within the switch managed network.
Displays whether a specific group has been defined as a guest
group (indicated with a green check mark) or has been configured
as permanent group (indicated with a red X). Guest users have
temporary Radius server access.
Display the VLAN ID(s) used by each group listed. The VLAN ID is
representative of the shared SSID each group member (user)
employs to interoperate with one another within the switch
managed network (once authenticated by the local Radius server).
Displays the time each group is authenticated to interoperate
within the switch managed network. Each user within the group
is authenticated with the local Radius server. Group members
successfully authenticated are allowed access to the switch
managed network under the restrictions defined for that group.