Modifying An Existing Local User - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
7-22
Switch Management
Help Desk Manager
Network
Administrator
System Administrator Select
Web User
Administrator
Super User
NOTE There are some basic operations/CLI commands (exit, logout and help) available to
all user roles. All the roles except Monitor can perform Help Desk role operations.
NOTE By default, the switch is HTTPS enabled with a self signed certificate. This is
required since the Web UI uses HTTPS for user authentication.
6. Select the access modes to assign to the new user from the options provided in the
panel. Select one or more of the following options:
Console
SSH
Telnet
Web-UI
7. Refer to the
Status
error messages if something goes wrong in the transaction between the applet and the switch.
8. Click the
OK
button to create the new user.
9. Click
Cancel
to revert back to the last saved configuration without saving any of your changes.
7.6.1.2 Modifying an Existing Local User
To create a new local user:
1. Select
Management Access
2. Select a user from the Users list and click the
3. The
Username
field is read-only field and displays the login name of the user.
Assign this role to someone who typically troubleshoots and
debugs problems reported by the customer. The Help Desk
Manager typically runs troubleshooting utilities (like a sniffer),
executes service commands, views/retrieves logs and reboots the
switch.
The
Network Administrator
and wireless parameters like IP config, VLANs, L2/L3 security,
WLANs, radios, IDS and hotspot.
System Administrator
general settings like NTP, boot parameters, licenses, perform
image upgrade, auto install, manager redundancy/clustering and
control access.
Assign
Web User Administrator
authentication (hotspot).
Select
Super User
to assign complete administrative rights.
This option provides the new user access to the switch using the
console.
This option provides the new user access to the switch using SSH.
This option provides the new user access to the switch using a
Telnet session.
This option provides the new user access to the switch through the
Web UI (applet).
field for the current state of the requests made from applet. This field displays
>
Users
from the main menu tree.
Edit
has privileges to configure all wired
to allow the user to configure
privileges to add users for Web
button.
Access Modes
Advertisement
Table of Contents
