Displaying Redundancy Member Details - Motorola RFS7000 Series System Reference Manual

4. Select a row, and click the
information, see Displaying Redundancy Member Details on page
5. Select a row and click the
redundancy group should be disabled to conduct an Add or Delete operation.
6. Click the Add button to add a member to the redundancy group. The redundancy group should be
disabled to conduct an Add or Delete operation. For more information, see
Adding a Redundancy Group Member on page

5.4.2.1 Displaying Redundancy Member Details

Use the Details screen (in conjunction with its parent Member screen) to display additional (more detailed)
information on the group member selected within the Member screen.
To review the details
1. Select Services
The Redundancy screen displays with the Configuration tab selected.
2. Select the Member
3. Highlight a member of the group and select the
4. Refer to the following redundancy member information:
IP Address
Details button to display additional details for this member. For more
Delete button to remove a member from the redundancy group. The
> Redundancy from the main menu tree.
tab.
Displays the IP addresses of the members of the redundancy group.
There are a minimum of 2 members needed to define a redundancy
group, including this current module
5-43.
5-45.
Details button.
5-43
Switch Services