Motorola RFS7000 Series System Reference Manual page 200

4-114 Network Setup
2. Click the WLAN Assignment
The WLAN Assignment tab displays two fields:
Select/Change Assigned
3. Within the Select Radios/BSS
Radio drop-down menu.
4. Select the desired BSS from the
5. Refer to the Select/Change Assigned WLAN
Primary WLAN
Assign
Index
Description
ESS ID
VLAN
tab.
Select Radios/BSS
WLANs.
field, select the radio type (802.11a or 802.11bg) from the
BSS list or select a
field for the following information:
If a specific BSS was selected from the
choose one of the selected WLANs from the drop-down menu as
the primary WLAN for the BSS.
If the radio was selected, the applet will automatically assign one
WLAN to each BSS. The WLAN is set as the
the BSS.
If the number of WLANs selected is greater than the number of
BSSIDs, the remaining WLANs are included with the last BSS.
Assign WLAN(s) to the selected BSS or Radio.
Displays (in ascending order) the numerical index assigned to each
SSID. Use the index (along with the WLANs name) as a means of
identifying WLANs once assigned to different radio BSSIDs. A
BSSID cannot support two WLANs with the same numerical index.
Use the WLAN description (along with the WLANs index) as a
means of identifying WLANs assigned to different radio BSSIDs. A
BSSID cannot support two WLANs with the same description.
Displays the assigned SSID uniquely distributed between the
WLANs assigned to the BSSIDs.
Displays the VLAN ID of VLANs assigned to WLANs. By default, all
WLANs are assigned to VLAN 1.
and
Radio (802.11a or 802.11bg) to modify.
Select Radio/BSS
Primary WLAN
Select
area,
for