Motorola RFS7000 Series System Reference Manual page 340

6-56 Switch Security
2. Click the Remote tab.
3. Refer to the Configuration
DNS Server
WINS Server
Apply
Revert
4. Click the IP Range tab to view the following:
Index
Starting IP Address
Ending IP Address
5. Click the Edit button (within the IP Range tab) to modify the range of existing IP addresses displayed.
6. Select an IP address range index and click the
available within the IP Range tab.
field to define the following:
Enter the numerical IP address of the DNS Server used to route information to
the remote destination of the IPSec VPN.
Enter the numerical IP address of the WINS Server used to route information
to the remote destination of the IPSec VPN.
Click Apply to save any updates made to the screen.
Click the Revert button to disregard changes and revert back to the last saved
configuration.
Enter the index assigned to the range of IP addresses displayed in the Starting
and Ending IP Address ranges. This index is used to differentiate the index
from others with similar IP addresses.
Enter the numerical IP address used as the starting address for the range
defined. If the Ending IP address is left blank, only the starting address is used
for the remote destination.
Enter a numerical IP address to complete the range. If the Ending IP address is
blank, only the starting address is used as the destination address.
Delete button to remove this range from those