Motorola RFS7000 Series System Reference Manual page 276

5-56 Switch Services
3. Select an existing neighbor and click the
The radio index and description display in the upper right corner of the screen. The
value represents the radios that can be added as a neighbor for the target radio.
are existing radios (neighbors).
4. Select one of the following four actions from the Self Healing Action drop-down menu:
• None - The radio takes no action at all when a neighbor radio fails.
• Open Rates - The radio will default to factory-default rates when a neighbor radio fails. Reboot
the system to invoke factory default settings.
• Raise Power - The radio raises its transmit power to the maximum provided its power is lower
than the maximum permissible value.
• Both - The radio increases power and data rate when a neighbor radio is not functioning as
expected.
5. Click the Add -> button to move a radio from the Available Radios list to the Neighbor Radios list.
This dedicates neighbors for this radio.
6. Select a radio and click
Radios list.
7. Refer to the Status field for an update of the edit process.
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
8. Click OK to save the changes to the running configuration and close the dialog.
9. Click Cancel to close the dialog without committing updates to the running configuration.
Edit button.
<- Remove to move the radio from the Neighbor Radios list to the Available
Available Radios
Neighbor Radios