Adding An Include List To A Wlan; Configuring Devices On The Include List - Motorola RFS7000 Series System Reference Manual

4-68 Network Setup

4.5.4.1 Adding an Include List to a WLAN

To add a device to a WLAN's include list configuration:
1. Select Network
2. Select the NAC Include
3. Click on the Add
4. Enter the name of the device to include for NAC authentication.
5. Refer to the Status
are any "SET/GET" operation from the applet. The Status field displays error messages if something
goes wrong in the transaction between the applet and the switch.
6. Click OK to save the new configuration and close the dialog window.
7. Click Cancel to close the dialog without committing updates to the running configuration.

4.5.4.2 Configuring Devices on the Include List

To add a multiple number of devices for a single device type:
1. Select Network
2. Select the NAC Include
3. Click on the Add
The List Name field displays the name of the device list used. This parameter is read-only.
4. Enter the Host Name
5. Enter the device's
6. Optionally, enter the
> Wireless LANs from the main menu tree.
tab to view and configure NAC Include enabled devices.
button in the Include Lists
field. It displays the current state of the requests made from the applet. Requests
> Wireless LANs from the main menu tree.
tab to view and configure all the NAC Include enabled devices.
button within the List Configuration
for the added device.
MAC Address.
MAC Mask for the device you wish to add.
area.
area.