Motorola RFS7000 Series System Reference Manual page 51

2. Select the Configuration
3. The system prompts the user for the correct
A warning message could display stating that an incorrect country setting will lead to an illegal use
of the switch. Selecting the correct country is extremely important. Each country has its own
regulatory restrictions concerning electromagnetic emissions (channel range) and the maximum RF
signal strength transmitted. To ensure compliance with national and local laws, be sure to set the
Country correctly.
4. Review or set the following information as needed:
System Name
Location
Contact
Uptime
Firmware
tab
Country
Displays the designated system name. Provide a system name
serving as a reminder of the user base the switch supports
(engineering, retail, etc.).
The Location parameter serves as a reminder of where the switch
can be found. Define the System Name as a specific identifier of
the switch's location. Use the System Name and Location
parameters together to optionally define the switch name by the
radio coverage type it supports and physical location. For example,
"second floor engineering."
Displays a Contact value for system administration and
troubleshooting. This name should be the network administrator
responsible for switch operations.
Displays the current operational time for the device name defined
within the System Name field. Uptime is the cumulative time since
the switch was last rebooted or lost power.
Displays the current firmware version running on the switch. This
version should be periodically compared to the most recent version
available on the Motorola Web site, as versions with increased
functionality are periodically released
Switch Information
code after the first login.
3-3