Configuring Wireless Filters - Motorola RFS7000 Series System Reference Manual

6-14 Switch Security

6.4 Configuring Wireless Filters

Use filters to either allow or deny a MAC address (or groups of MAC addresses) from associating with the
switch. Refer to the Wireless Filters
selected from those available and edited or deleted. Additionally, a new filter can be added if an existing filter
does not adequately express the MU's address range required.
To display the Wireless Filters main page:
1. Select Security > Wireless Filters
2. The Wireless Filters
• Filters
• Associated WLANs
The Filters field contains the following read-only information:
MU-ACL Index
Starting MAC
Ending MAC
Allow/Deny
screen to review the properties of existing switch filters. A filter can be
from the main menu tree.
tab is divided into 2 fields:
Displays a numerical identifier used to associate a particular ACL
to a range of MAC addresses (or a single MAC address) either
allowed or denied access to the switch managed network.
Displays the beginning MAC Address (for this specific Index) either
allowed or denied access to the switch managed network.
Displays the ending MAC Address (for this specific Index) either
allowed or denied access to the switch managed network.
States whether this particular ACL Index and MAC address range
has been allowed or denied access to the switch managed
network.