2. Select the
Beacons Found
3. Refer to the following information as displayed within the
Portal MAC
Rogue AP MAC
Signal Strength
(dBm)
Heard Channel
Hear Time
4. Click the
Clear Report
tab.
The MAC address of the unadopted AP detected by the enhanced beacon
supported AP.
The MAC address of the enhanced beacon supported AP.
The signal strength when the unadopted AP was detected.
The channel frequency when the unadopted AP was detected.
The time when the unadopted AP was detected.
button to reset the statistic counters to zero and begin new calculations.
Switch Security
Beacons Found
tab.
6-101