Motorola RFS7000 Series System Reference Manual page 19

Switch Status (Redundant System)
System Status 1 LED
Off
Green Solid
Green Blinking
Green Blinking
Green Solid
Fan LED
Off
Green Blinking
Green Solid
Amber Solid
Amber Blinking
Temperature Status LED
Temperature LED
Off
Green Solid
Amber Solid
Amber Blinking
System Status 2 LED
Off
Off
Green Solid
Alternating Green Blinking
& Amber Blinking
Amber Blinking
Fan LED
System Off / POST Start
POST in process
All system fans in normal operation
Redundant cooling failure
System operational
System cooling failure
System will be held in reset until the issue is
resolved
System Off
Ambient inlet temperature is within specified
operating limit
Ambient inlet temperature is near the maximum
operating temperature
When starting the switch, this LED will be lit
Solid Amber. This is normal behavior and does
not indicate an error
Ambient inlet temperature is above the
maximum specified operating temperature
System will be held in reset until the issue is
resolved
Event
Power off
No redundancy feature enabled
Redundant system failed over and adopting
ports
Redundant system not failed over.
No License to adopt Access Ports
or
No Country Code configured on the switch
or
License and Country Code configured, but no
APs adopted
Event
Event
1-5
Overview