Motorola RFS7000 Series System Reference Manual page 181

2. Click the Statistics tab.
3. To define the time frame for the radio statistics, select either
table.
• Select the Last 30s radio button to display statistics for the last 30 seconds.
• Select the Last Hr radio button to display statistics from the last hour.
4. Refer to the table for the following information:
Index
Description
Type
MUs
Throughput Mbps
Average Mbps
RF Util
% Non-UNI
Displays the numerical index (device identifier) used with the radio.
Use this index (along with the radio name) to differentiate the radio
from other device radios.
Displays the name used with the radio. Use this name (along with
the radio index) to differentiate the radio from other device radios.
Identifies whether the radio is an 802.11a radio or an 802.11 bg
radio.
Displays the number of MUs currently associated with the access
port.
Displays the average throughput in Mbps for the selected radio.
The Rx column displays the average throughput in Mbps for
packets received on the selected radio. The Tx column displays the
average throughput for packets sent on the selected radio.
Displays the average bit speed in Mbps on the selected access
port. This value includes packets both sent and received.
Displays the percentage of the total packets for the selected radio
that are non-unicast packets. Non-unicast packets include
broadcast and multicast packets.
Displays the percentage of packets for the selected radio that are
non-unicast packets. Non-unicast packets include broadcast and
multicast packets.
Network Setup
Last 30s or Last Hr above the statistics
4-95