3. Refer to the
History
State
Time
Trigger
Description
4. Click
Apply
to save any changes to the screen. Navigating away from the screen without clicking the
Apply button results in all the changes on the screen being discarded.
5. Click the
Revert
button to undo the changes to the screen and revert to the last saved configuration.
5.4.1 Reviewing Redundancy Status
The switch is capable of displaying the status of the cluster membership. Use this information to assess the
overall health and performance of the group.
To configure switch redundancy memberships:
1. Select
Services
2. Select the
Status
field to view the current state of the redundancy group.
Displays the new state (status) of the redundancy group after a
Trigger event.
Displays the Timestamp (time zone specific) when the state change
occurred.
Displays the event causing the redundancy group state change on
the switch.
Displays a redundancy event description defining the redundancy
group state change on the switch. Typical states include
Redundancy Disabled or Redundancy Enabled.
>
Redundancy
from the main menu tree.
tab.
5-39
Switch Services