Table of Contents
Advertisement
After obtaining the PFE key, install the feature as follows:
1. Set the switch offline as follows:
a. At the Configure panel, select the Operations option at the left
side of the panel. The Operations panel opens and the Switch
page displays with the Beacon tab selected
b. Click the Online State tab, then click Set Offline. The message
Your operations changes have been successfully activated
appears.
2. At the Configure panel, select the Operations option at the left side
of the panel. The Operations panel opens with the Switch page
displayed.
3. Click the Feature Installation tab. The Operations panel opens with
the Feature Installation page displayed
Operations Panel (Feature Installation Tab)
Figure 116
4. Type the PFE key and click Activate. The interface displays a
confirmation page with a warning, stating this action overrides
the current set of switch features.
5. Click Activate to activate the new PFE key. The switch performs an
IPL when the key is activated.
(Figure
116).
Chapter 2: Installation tasks
185
Advertisement
Table of Contents
