Table of Contents
Advertisement
Internet Protocol (TCP/IP) properties dialog box
Figure 46
6. The Use the following IP address radio button is enabled and the IP
address and Subnet mask fields display network information
configured while performing
password and network addresses
7. At the Default gateway field, enter the gateway address obtained
from the customer's network administrator.
8. Select (enable) the Use the following DNS server addresses radio
button. At the Preferred DNS server field, enter the DNS server IP
address obtained from the customer's network administrator,
then click OK to apply the changes and close the dialog box.
9. Click OK to close the Local Area Connection 2 Properties dialog box.
10. Record the changed gateway and DNS server addresses for
reference if the management server hard drive fails and must be
restored.
11. To optionally configure addresses for the public LAN connection
(LAN 1), double-click the Local Area Connection 1 icon and repeat
step 3
through
12. Click close (X) at the upper right corner of the Network and Dial-up
Connections window to return to the Windows 2000 desktop.
Task 7: Configure management server
on page 75.
step 10
of this procedure.
Chapter 2: Installation tasks
87
Advertisement
Table of Contents
