Table of Contents
Advertisement
Mounting bracket installation (Ethernet hub)
Figure 13
2. Position the first hub in the equipment rack as directed by the
customer. Align screw holes in the mounting brackets with screw
holes in the rack-mount standards.
NOTE: The hub is 4.445 centimeters (1.75 inches) or one rack unit (1U)
high.
3. Secure both sides of the hub to the rack-mount standards as
shown in
Allen-head mounting screws (10/32 x 0.5-inch) provided.
Rack installation (Ethernet hub)
Figure 14
Figure
14. Use the 1/8-inch Allen wrench and four
Chapter 2: Installation tasks
61
Advertisement
Table of Contents
