Table of Contents
Advertisement
Editing the switch
membership list
Figure 72
116
SAN32M1 Fabric Switch Installation and Service Manual
5. Edit the Switch Membership List through the Switch Binding
Membership List dialog box to add or remove switches and devices
that are allowed to connect with the switch. Refer to
switch membership list
Membership List.
1. Select the Edit Membership List option from the Configure menu's
Switch Binding submenu in the element manager. The Switch
Binding Membership List dialog box displays. The WWNs of
devices and/or switches that can currently connect to switch
ports are listed in the Switch Membership List panel.
Switch binding membership list dialog box
NOTE: Refer to Configure Switch Binding for information on how the
Switch Membership List is populated with WWNs according to options
set in the Switch Binding State Change dialog box.
2. If nicknames are configured for WWNs through the SAN
management application and you want these to display instead of
WWNs in this dialog box, click the Display Options button at the
bottom of the dialog box. When the Display Options dialog box
displays, click Nickname, then OK.
for a procedure for editing the Switch
Editing the
Advertisement
Table of Contents
