Table of Contents
Advertisement
Appendix B: Event code tables
© Copyright IBM Corp. 2005
This appendix lists all three-digit switch event codes and provides
detailed information about each code. Event codes are listed in
numerical order and in tabular format.
An event is an occurrence (state change, problem detection, or
problem correction) that requires user attention or that should be
reported to a system administrator or service representative. An
event usually indicates an operational state transition, but may also
indicate an impending state change (threshold violation). An event
may also provide information only, and not indicate an operational
state change. Event codes are grouped as follows:
•
000 through 199 - system events.
•
200 through 299 - power supply events.
•
300 through 399 - fan module events.
•
400 through 499 - CTP card events.
•
500 through 599 - port module events.
•
600 through 699 - SBAR module events.
•
700 through 799 - Reserved for future use.
•
800 through 899 - Thermal
Events can be recorded in the Event Logs at the Enterprise Fabric
Connectivity (EFC) Server, or at a remote workstation if e-mail and
call-home features are enabled. An event may also illuminate the
system error (ERR) light-emitting diode (LED) on the front panel.
In addition to numerical event codes, the tables in this appendix also
provide a:
•
Message - a brief text string that describes the event.
•
Severity - a severity level that indicates event criticality as
follows:
— 0 - informational.
— 2 - minor.
— 3 - major.
— 4 - severe (not operational).
423
Advertisement
Table of Contents
