Table of Contents
Advertisement
.
Figure 184
Port properties dialog box
NOTE: If the Open Trunking feature is installed an additional item will
appear in the Port Properties dialog box, called Congested Threshold %. This
field displays the active congested threshold percentage currently configured
in the Configure Open Trunking dialog box.
The dialog box provides the following information:
•
Port Number - the switch port number (0 through 31).
•
Port Name - the user-defined name or description for the port.
•
Type - the type of port (G_Port if nothing is attached to the port,
F_Port if a device is attached to the port, and E_Port if the port is
connected to another switch as part of an ISL).
•
Fibre Channel Address - the Fibre Channel address identifier for
the port.
•
Port WWN - the Fibre Channel WWN for the port.
•
Attached Port WWN - the Fibre Channel WWN for the device
attached to the port.
•
Block Configuration - a user-configured state for the port (Blocked
or Unblocked).
Chapter 4: Repair information
329
Advertisement
Table of Contents
