Table of Contents
Advertisement
Figure 62
102
SAN32M1 Fabric Switch Installation and Service Manual
Domain Information Dialog Box (IP Address Page)
3. Type a switch description (SAN32M1, for example) in the
Description field.
4. Type the switch IP address (determined by the customer's
network administrator) in the IP Address field.
5. Type the switch subnet mask (determined by the customer's
network administrator) in the Subnet Mask field.
6. At the Data Source for Domain area of the dialog box, select the Use
auto detection, Use the server, or Use a specific RDC radio button
(determined by the customer's network administrator).
7. Click OK to save the entered information, close the dialog box,
and define the switch to the SAN management application.
8. Repeat
step 2
through
9. Click OK to close the Discover Setup dialog box and return to the
SAN management application.
step 7
for each new switch.
Advertisement
Table of Contents
