Table of Contents
Advertisement
Figure 19
Figure 20
70
SAN32M1 Fabric Switch Installation and Service Manual
When the new network addresses are configured at the switch,
the message Request completed OK displays at the bottom of the
HyperTerminal window.
12. Select Exit from the File menu to close the HyperTerminal
application. The following message box appears:
Disconnect confirmation message box
13. Click Yes. The following message box appears:
Save session device confirmation box
14. Click No to exit and close the HyperTerminal application.
15. Power off the maintenance terminal:
a. Click the Windows Start button and select the Shut Down
option.
b. At the Shut Down Windows dialog box, select Shut down the
Computer and click Yes to power off the PC.
16. Disconnect the RS-232 modem cable from the switch and the
maintenance terminal. Replace the protective cap over the
maintenance port.
Advertisement
Table of Contents
