1. At the Configure panel, click the Fabric Binding tab. The Security
page displays with the Fabric Binding tab selected
Configure Panel (Security Page with Fabric Binding Tab)
Figure 113
2. The saved status of the fabric binding configuration displays at
the top of the page. The status can be:
• Saved & Active - Information displayed on the page reflects
the active configuration saved for the fabric.
• Unsaved & Active - Information displayed may be different
than the active configuration saved for the fabric.
• Unsaved & Inactive - Information displayed may be different
than the active configuration saved for the fabric.
(Figure
113).
Chapter 2: Installation tasks
179