Table of Contents
Advertisement
.
Figure 174
Hardware log
To open the Hardware Log, select Hardware Log from the Logs menu on
the navigation control panel.
The log contains the following columns:
•
Date/Time - the date and time the FRU was inserted or removed.
•
FRU-Position - an acronym representing the FRU or non-FRU
elements, followed by a number representing the FRU or chassis
position. The acronyms are:
— SFP - Small form factor pluggable (SFP) optical transceiver.
Chassis slots for SFPs inserted in a port are 0 through 31. SFPs
are FRUs.
— PWR - power supply. Chassis slots for redundant power
supplies are 0 and 1. Power supplies are FRUs.
— FAN - cooling fan. Chassis slots for redundant fans are 0
through 3. Fans are FRUs.
— CTP - control processor (CTP) card. The chassis slot is 0. The
CTP card is not a FRU.
— THM - thermal sensor. The chassis slot is 0. The thermal
sensor is not a FRU.
•
Position - a number representing the FRU chassis position.
Chassis slots for power supplies are 0 and 1. Chassis slots for fans
are 0 through
inclusive. Chassis slots for SFPs are 0 through 31.
3
•
Action - the action performed (Inserted or Removed).
•
Part Number - the part number of the inserted or removed FRU.
Chapter 4: Repair information
313
Advertisement
Table of Contents
