Figure 159
Switch binding - membership list dialog box
b. At the Switch Binding - Membership List dialog box ensure the
Switch Membership List is updated and correct for each switch,
then click Activate for each switch. The switch binding feature is
consistently enabled for both switches.
Did updating the switch membership lists solve the problem?
NO
YES
↓
The switch appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
32
A port connection is not allowed because of a Computer Network
Technologies (CNT) wide area network (WAN) extension mode
mismatch. Based on switch-to-switch differences between the ELP
maximum frame sizes allowed, a connection was not allowed to a
switch set to CNT WAN extension mode.
Chapter 3: Diagnostics
277