SAN management application
24
SAN32M1 Fabric Switch Installation and Service Manual
•
The EFC Management Services (EMS) application that runs as a
Windows 2000 service and provides an additional user interface
to display operational status.
•
The SANpilot interface that provides Internet access to isolate
problems for a single switch.
•
Unsolicited SNMP trap messages that indicate operational state
changes or failures can be transmitted to up to 12 authorized
management workstations.
•
E-mail messages or call-home reports provide automatic
notification of significant system events to designated support
personnel or administrators.
Access Element Managers for director and switch products through
SAN management application. Right-click the product icon on the
application Physical Map (topology) and select Element Manager from
the pop-up menu.
NOTE: In the following figure, the Model XXXX under the product icon will
be replaced with an actual switch or director model number in your SAN
management application Physical Map (topology).