Table of Contents
Advertisement
Refresh the link
incident log
Clear the link
incident log
Threshold alert log
— Link failure - not-operational primitive sequence received.
— Link failure - primitive sequence timeout.
— Link failure - invalid primitive sequence received for current
link state.
Refer to
MAP 0600: port failure and link incident analysis
MAP 0700: fabric, ISL, and segmented port problem determination
page 281 for corrective actions in response to these link incident
messages.
To ensure recently-created link incidents appear in the Link Incident
Log, periodically refresh the log display. To refresh the log, click
Refresh at the bottom of the log window.
To ensure the Link Incident Log is up-to-date and not filled with
archived incidents, periodically clear the log display. To clear the log,
click Clear at the bottom of the log window.
This log provides details of threshold alert notifications. Besides the
date and time that the alert occurred, the log also displays details
about the alert as configured through the Configure Threshold Alert(s)
option under the Configure menu.
on page 261 or
Chapter 4: Repair information
on
315
Advertisement
Table of Contents
