Mpc Module Events (600 Through 699) - IBM TotalStorage SAN32M1 Installation And Service Manual

MPC module events (600 through 699)

Event Code: 602
Message: SBAR module anomaly detected
Severity: Informational
Explanation: Indicates that the control processor has detected a deviation in the normal operating mode or operating status of
the indicated SBAR module.
Action: No action required. There will be an additional event generated (604) if this event results in an SBAR logic failure.
Event Data: Byte 0 = Slot position
Byte 1 = Anomaly reason code (See following chart)
Bytes 4-7 = Elapsed millisecond tick count
Bytes 8-9 = High Availability error callout #1
Bytes 10-11 = High Availability error callout #2
Byte 12 = Detecting port
Byte 13 = Connected port
Byte 14 = Participating SBAR
Bytes 16-17 =.High Availability error callout #3
Bytes 18-19 =.High Availability error callout #4
Distribution: Switch
Nonvolatile
System
Event Log
Event #602 Anomaly Reason Codes
Reason Code Description
0x00 Utility bus error to SBAR
0x01 Utility bus error to Port Module
0x02 Reserved
0x03 SBAR module detected utility bus parity error
0x04 Port module detected utility bus parity error
System Event Log
Error
Indicator
EFC Server
E-Mail Call-Home
Additional Data
HA Error Callouts (Words 2 & 4)
HA Error Callouts (Words 2 & 4)
HA Error Callouts (Words 2 & 4)
HA Error Callouts (Words 2 & 4)
HA Error Callouts (Words 2 & 4)
Appendix B: Event code tables
Host
Sense Info Link Incident
489