Table of Contents
Advertisement
1. At the View panel, select the Configure option at the left side of the
panel. The Configure panel opens with the Ports page displayed.
2. At the Configure panel, click the Management tab. The Management
page displays with the SNMP tab selected
page 171).
a. Click the Enable SNMP Agent check box to enable or disable
the installed SNMP agent.
b. Select the appropriate Fibre Alliance management information
base (FA MIB) from the FA MIB Version drop-down list.
Available selections are:
• FA MIB Version 3.0.
• FA MIB Version 3.1.
c. Click the Enable Authentication Traps check box to enable or
disable transmission of SNMP trap messages to configured
recipients.
Configure Panel (Management Page with SNMP Tab)
Figure 107
(Figure 107
on
Chapter 2: Installation tasks
171
Advertisement
Table of Contents
