Table of Contents
Advertisement
46
Port beaconing is enabled.
a. Consult the customer and next level of support to determine the
reason port beaconing is enabled.
b. Disable port beaconing:
1. At the View panel, select Operations at the left side of the
panel. The Operations panel opens with the Port Beaconing
page displayed.
2. Click the Beaconing State check box for the port. The check
mark disappears from the box and port beaconing is
disabled.
3. Return to the View panel (Port Properties tab).
Continue.
47
At the View panel, does the Operational State field display a
Segmented message?
NO
YES
↓
Port segmentation is indicated. Go to
codes. If no event codes are found, go to
ISL, and segmented port problem determination
page 281.
48
At the View panel, does the Operational State field display a message
indicating a link incident or port problem?
NO
YES
↓
A port problem is indicated. Go to
codes. If no event codes are found, go to
failure and link incident analysis
49
Repeat
step 45
through
Is a link incident or port problem indicated for any of the ports?
NO
YES
↓
A link incident problem or port SFP failure is indicated. Go to
step 52
to obtain event codes. If no event codes are found,
step 52
step 52
on page 261.
step 48
for each remaining port.
Chapter 3: Diagnostics
to obtain event
MAP 0700: fabric,
on
to obtain event
MAP 0600: port
215
Advertisement
Table of Contents
