Table of Contents
Advertisement
302
SAN32M1 Fabric Switch Installation and Service Manual
YES
NO
↓
Go to
step
9.
8
At the EFC Manager Login dialog box, type a user name, password,
and EFC Server name (obtained in
page 195, and case sensitive), and click Login. The EFC Manager
application opens and the Products View displays.
Did the Products View display and does the EFC Manager application
appear operational?
NO
YES
↓
The server appears operational. Exit MAP.
9
Perform one of the following:
•
If the server has standalone diagnostic test programs resident
on the hard drive, perform the diagnostics. Refer to supporting
documentation shipped with the server for instructions.
•
If the server does not have standalone diagnostic test programs
resident on hard drive, go to
Did diagnostic test programs detect a problem?
NO
YES
↓
Refer to the supporting documentation shipped with the
server for instructions to resolve the problem. Exit MAP.
10
Reboot the server.
a. At the Windows 2000 desktop, click Start at the left side of the
task bar (bottom of the desktop), then select Shut Down. The
Shut Down Windows dialog box displays
page 300).
b. Select the Shut Down option from the list box and click OK. The
EFC Server powers down.
c. Wait approximately 30 seconds and press the power (
on the LCD panel to power on the server and perform POSTs.
During POSTs:
1. The green LCD panel illuminates.
MAP 0000: Start MAP
step
10.
(Figure 167
on
on
) button
Advertisement
Table of Contents
