Table of Contents
Advertisement
Figure 57
Task 12: Assign user names and passwords
Call Home configuration dialog box
3. At the Call Center Phone Number field, enter the telephone number
for IBM technical support. Include necessary information, such as
the country code, area code, or any prefix required to access a
telephone line outside the facility.
4. At the Local Phone Number field, enter the telephone number for
access to the local server. Include necessary information such as
the country code or area code.
5. Click OK to save the configured telephone numbers and close the
dialog box.
In addition to password access for the Windows 2000 operating
system, users must be configured for access to the SAN management
application. To assign SAN management application user names and
passwords:
1. At the Windows 2000 desktop, the SANavigator Log In or EFCM
Log In dialog box displays
was opened when performing
information
on page 80.
2. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default SAN management application user ID is
Administrator and the default password is password. The user
name and password are case-sensitive.
3. Click Login. The application opens and the SANavigator or EFCM
main window appears
(Figure 39
on page 82). The dialog box
Task 8: Configure management server
(Figure 58
on page 98).
Chapter 2: Installation tasks
97
Advertisement
Table of Contents
