Table of Contents
Advertisement
Task 8: Configure management server information
Access the management server desktop
80
SAN32M1 Fabric Switch Installation and Service Manual
8. Record the public LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
Configure the computer name and workgroup name for the
management server. Configure these parameters from the server's
Windows 2000 operating system, using a LAN-attached PC with
standard web browser.
If required, change the management server's gateway addresses and
domain name system (DNS) server IP addresses to conform to the
customer's LAN addressing scheme. The gateway addresses are the
addresses of the local router for the corporate intranet.
To login and access the management server desktop:
1. Ensure the management server and a browser-capable PC are
connected through an Ethernet LAN segment. At the PC, launch
the browser application (Netscape Navigator or Internet
Explorer).
2. At the PC browser, enter the LAN 2 IP address of the
management server, followed by :5800, as the Internet uniform
resource locator (URL). Enter the URL in the following format:
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address of 10.1.1.1 or the
IP address configured while performing
management server password and network addresses
VNC Authentication screen displays
Task 7: Configure
on page 75. The
(Figure
36).
Advertisement
Table of Contents
