Table of Contents
Advertisement
Configure private LAN addresses
Figure 26
Figure 27
Figure 28
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server's LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following
(Figure
26):
Input Password:
0****
LCD panel (password entry)
2. Using the
button to increment a digit, the
decrement a digit, the
and the
button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press the
button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the following message appears
(Figure
27) with the default IP address of 10.1.1.1.
Input IP:
010.001.001.001
LCD panel (LAN 2 IP address)
4. Use the arrow keys as described in
address, then press ENTER. The following message appears
(Figure
28):
Save Change?
Yes, Save !!
LCD panel (save change)
5. Press ENTER. The LAN 2 IP address changes and the following
message appears
(Figure
255.0.0.0.
button to
button to move the cursor left,
step 2
to input a new IP
29) with the default subnet mask of
Chapter 2: Installation tasks
77
Advertisement
Table of Contents
