Table of Contents
Advertisement
SANtegrity™binding features
Fabric binding
112
SAN32M1 Fabric Switch Installation and Service Manual
Code Page Name
Japan
Spain/Latin America
United Kingdom
France
International #5
4. Click Activate to enable changes and allow or prohibit FICON
host control.
SANtegrity Binding includes a set of features that enhance security in
SANs (Storage Area Networks) that contain a large and mixed group
of fabrics and attached devices. Through these features you can allow
or prohibit switch attachment to fabrics and device attachment to
switches. These features are enabled by purchasing a feature key,
then enabling the key through the Configure Feature Key dialog box.
For general instructions in enabling a feature key, refer to
Configure PFE Key (optional)
SANtegrity Binding features include:
•
Fabric Binding
•
Switch Binding
Enterprise Fabric Mode - Although this is not a keyed feature, the
SANtegrity Fabric Binding and Switch Binding must be installed
before you can use Enterprise Fabric Mode function through the SAN
management application Fabrics menu.
This feature is managed through the Fabric Binding option, available
through the Fabrics menu in the SAN management application when
the Fabrics tab is selected. Using Fabric Binding, you can allow
specific switches to attach to specific fabrics in the SAN. This
provides security from accidental fabric merges and potential fabric
disruption when fabrics become segmented because they cannot
merge.
Code Page
00281
00284
00285
00297
00500
on page 106.
Task 16:
Advertisement
Table of Contents
