Table of Contents
Advertisement
Figure 163
288
SAN32M1 Fabric Switch Installation and Service Manual
At the Hardware View for the selected switch, click the Configure
menu tab and select Switch Parameters from the Operating
Parameters sub menu. The Configure Switch Parameters dialog box
displays.
Configure switch parameters dialog box
d. Type the customer-determined preferred domain ID value, then
click Activate.
e. Repeat steps d and e at the Hardware View for the switch
attached to the segmented E-Port (second switch). Use a
different preferred domain ID value.
f. Set both switches online
Did the domain ID change solve the problem and did both switches
join through the ISL to form a fabric?
NO
YES
↓
The switches, associated ISL, and multiswitch fabric appear
operational.
Contact the next level of support.
14
The switch E_Port segmented because two switches have
incompatible zoning configurations. An identical zone name is
recognized in the active zone set for both switches, but the zones
contain different members.
(Set online state
on page 350).
Advertisement
Table of Contents
