Table of Contents
Advertisement
Figure 155
Figure 156
274
SAN32M1 Fabric Switch Installation and Service Manual
Fabric binding dialog box (first)
b. Ensure the Enable Fabric Binding checkbox is enabled
(checked) for both switches.
c. At the first Fabric Binding dialog box (both switches), click Next.
The second Fabric Binding dialog box displays.
d. At the second Fabric Binding dialog box (both switches), click
Next. The third Fabric Binding dialog box displays.
e. At the third Fabric Binding dialog box, click Activate for each
switch. The fabric binding feature is consistently enabled for both
switches.
f. At the Hardware View for each switch, click Configure and select
Switch Binding and Change State. The Switch Binding - State
Change dialog box displays.
Switch binding - state change dialog box
g. Ensure the Enable Switch Binding checkbox is enabled
(checked) for both switches.
h. Ensure the Connection Policy radio buttons are compatible for
both switches.
Advertisement
Table of Contents
