Table of Contents
Advertisement
Configure FICON management server dialog box
Figure 70
2. Enable or disable the following options by selecting (clicking) the
associated check box:
— Switch Clock Alert Mode - this option enables or disables a
warning message that appears if the switch is set to
periodically synchronize date and time with the management
server
Synchronizing date and time with the management server
may conflict with the date and time set from the attached host.
If a check mark displays, clock alert mode is enabled.
— Programmed offline state control - this option enables or
disables host (S/390 or zSeries 900) ability to set the switch
offline state. If a check mark displays, control is enabled.
— Host Control Prohibited - this option allows or prohibits host
(S/390 or zSeries 900) control of the switch. If a check mark
displays, host control is prohibited.
— Active = Saved - when this option is enabled, the active
configuration of logical port addresses is used when the IPL
configuration file is updated. If a check mark displays, the
Active = Saved option is enabled.
3. Select the appropriate country code page from the following Code
Page list box.
Code Page Name
United States/Canada
Germany/Austria
Brazil
Italy
(Task 18: Set switch date and time
Code Page
00037
00273
00275
00280
on page 124).
Chapter 2: Installation tasks
111
Advertisement
Table of Contents
