Table of Contents
Advertisement
Task 11: Assign user names and passwords
60
SAN32M-2 Installation and Service Manual
3. At the Call Center Phone Number field, enter the telephone number
for IBM support. Include necessary information, such as the
country code, area code, or any prefix required to access a
telephone line outside the facility.
4. At the Local Phone Number field, enter the telephone number for
access to the local server. Include necessary information such as
the country code or area code.
5. Click OK to save the configured telephone numbers and close the
dialog box.
In addition to password access for the Windows operating system,
users must be configured for SAN management application access.
To assign application user names and passwords:
1. At the Windows desktop, the SANavigator Log In or EFCM Log In
dialog box displays. The dialog box was opened when
performing
Task 7: Configure management server
2. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default user ID is Administrator and the default password is
password. Both are case-sensitive.
3. Click Login. The application opens and the SANavigator or EFCM
main window appears.
4. Select Users from the SAN menu. The SANavigator Server Users or
EFCM Server Users dialog box displays.
5. Click Add. The Add User dialog box displays
information.
(Figure
29).
Advertisement
Table of Contents
